Load data for 9 mm Luger (9 x 19 mm) + .355 | 80gr | Barnes XPB

Recommended Powder(s): Hodgdon TiteGroup, Maxam CSB 5, Rottweil P 801, SNPE Vectan BA10, Vihtavuori N310

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.355 \| 80gr \| Barnes XPB
Manufacturer SKU:	35505
Bullet Weight:	80gr \| 5.2g
Bullet Diameter:	0.355" \| 9.02mm
Bullet Length:	0.720" \| 18.3mm
Caliber:	9 mm Luger (9 x 19 mm) load data
Case Length (l3):	0.754" \| 19.2mm
Cartridge Length (C.O.L.):	1.151" \| 29.2mm
Seated Depth:	0.323" \| 8.2mm
Shank Seated Depth:	0.323" \| 8.2mm
Case Capacity:	13.8 Grains of Water \| 0.90 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	34084 psi \| 2350 bar
LID:	LID_B695_C1219
Last updated:	2025-01-01

Load data for 70 loads in caliber 9 mm Luger (9 x 19 mm) with .355 | 80gr | Barnes XPB bullet and 35 powders such as Hodgdon TiteGroup, Maxam CSB 5, Rottweil P 801, SNPE Vectan BA10, Vihtavuori N310. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	94%	21625	63%	**17	93%
ADI APS 350	<<locked>>	92%	24656	72%	**93	100%
ADI APS 450	<<locked>>	95%	25077	74%	**35	100%
ADI AS 30	<<locked>>	96%	20262	59%	**19	100%
ADI AS 50N	<<locked>>	95%	20784	61%	**52	97%
Accurate Solo 1000	<<locked>>	95%	21408	63%	**32	98%
[Accurate Solo 1250]*	<<locked>>	93%	14547	43%	**10	84%
[Alliant BULLSEYE]*	<<locked>>	97%	22945	67%	**20	86%
Baschieri & Pellagri 100	<<locked>>	93%	17535	51%	**60	93%
Hodgdon Clays	<<locked>>	92%	24787	73%	**09	100%
Hodgdon HP38	<<locked>>	87%	30052	88%	**06	98%
Hodgdon TiteGroup 👍	<<locked>>	79%	29544	87%	**70	100%
Hodgdon Universal	<<locked>>	95%	17419	51%	**29	90%
Lovex D032	<<locked>>	73%	27601	81%	**04	92%
Lovex S011	<<locked>>	95%	28079	82%	**40	96%
[Lovex S020]*	<<locked>>	97%	17927	53%	**15	83%
[Maxam CSB 1]*	<<locked>>	94%	13663	40%	**8	84%
[Maxam CSB 2]*	<<locked>>	96%	11966	35%	**30	89%
Maxam CSB 3	<<locked>>	96%	17637	52%	**93	94%
Maxam CSB 4	<<locked>>	93%	18014	53%	**99	97%
Maxam CSB 5 👍	<<locked>>	97%	22510	66%	**71	100%
Ramshot Zip	<<locked>>	87%	28529	84%	**86	96%
ReloadSwiss RS 12	<<locked>>	96%	16215	48%	**71	97%
Rottweil P 801 👍	<<locked>>	96%	21712	64%	**43	100%
[SNPE Vectan BA 9]*	<<locked>>	97%	20871	61%	**22	88%
SNPE Vectan BA10 👍	<<locked>>	94%	27920	82%	**75	100%
[SNPE Vectan BA9 1/2]*	<<locked>>	95%	17564	52%	**93	88%
Shooters World Clean Shot	<<locked>>	73%	27601	81%	**04	92%
Shooters World Ultimate Pistol	<<locked>>	80%	30255	89%	**48	91%
Somchem S121	<<locked>>	78%	30037	88%	**68	95%
Vihtavuori N310 👍	<<locked>>	95%	30095	88%	**53	100%
Vihtavuori N320	<<locked>>	95%	17419	51%	**19	97%
Vihtavuori N32C Tin Star	<<locked>>	94%	8209	24%	**3	94%
[Vihtavuori N330]*	<<locked>>	94%	15447	45%	**73	87%
Winchester 231	<<locked>>	96%	28529	84%	**86	96%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 70N]*	<<locked>>	70%	11356	33%	**8	82%
ADI APS 350	<<locked>>	61%	12401	36%	**0	100%
ADI APS 450	<<locked>>	62%	11473	34%	**0	99%
ADI AS 30	<<locked>>	62%	9282	27%	**7	92%
[ADI AS 50N]*	<<locked>>	60%	9007	26%	**0	84%
[Accurate Solo 1000]*	<<locked>>	63%	10356	30%	**0	87%
[Accurate Solo 1250]*	<<locked>>	88%	13024	38%	**8	82%
[Alliant BULLSEYE]*	<<locked>>	84%	17071	50%	**83	80%
[Baschieri & Pellagri 100]*	<<locked>>	68%	9442	28%	**0	82%
Hodgdon Clays	<<locked>>	61%	12270	36%	**6	100%
[Hodgdon HP38]*²	<<locked>>	59%	12995	38%	**1	86%
Hodgdon TiteGroup	<<locked>>	61%	16897	50%	**53	97%
[Hodgdon Universal]*	<<locked>>	77%	11356	33%	**8	82%
[Lovex D032]*²	<<locked>>	59%	16447	48%	**07	84%
[Lovex S011]*	<<locked>>	60%	11095	33%	**9	81%
[Lovex S020]*	<<locked>>	92%	16259	48%	**73	81%
[Maxam CSB 1]*	<<locked>>	89%	12227	36%	**5	81%
[Maxam CSB 2]*	<<locked>>	82%	8775	26%	**2	82%
[Maxam CSB 3]*	<<locked>>	66%	8586	25%	**4	80%
[Maxam CSB 4]*	<<locked>>	62%	8543	25%	**0	84%
[Maxam CSB 5]²	<<locked>>	59%	8847	26%	**7	94%
[Ramshot Zip]*	<<locked>>	62%	13721	40%	**8	86%
[ReloadSwiss RS 12]*	<<locked>>	65%	7440	22%	**0	83%
Rottweil P 801	<<locked>>	62%	8557	25%	**9	91%
[SNPE Vectan BA 9]*	<<locked>>	80%	14040	41%	**8	80%
SNPE Vectan BA10	<<locked>>	63%	13256	39%	**9	100%
[SNPE Vectan BA9 1/2]*	<<locked>>	81%	12633	37%	**8	82%
[Shooters World Clean Shot]*²	<<locked>>	59%	16447	48%	**07	84%
[Shooters World Ultimate Pistol]*	<<locked>>	62%	17114	50%	**89	81%
[Somchem S121]*	<<locked>>	62%	16621	49%	**12	86%
Vihtavuori N310	<<locked>>	60%	11327	33%	**8	100%
[Vihtavuori N320]*	<<locked>>	65%	8253	24%	**3	83%
[Vihtavuori N32C Tin Star]*	<<locked>>	70%	5482	16%	**9	84%
[Vihtavuori N330]*	<<locked>>	85%	12299	36%	**1	82%
[Winchester 231]*	<<locked>>	62%	11037	32%	**9	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data